Tools & product range.
The tools, equipment and materials the trade uses. Prices are indicative market prices with source — always check the current price with the retailer.
Machines
Random orbital sander~ 250–900 krIndicative · Bauhaus · 2026-06
Angle grinder 125 mm~ ~520 krIndicative · Bauhaus (Bosch Professional GWS 750-125) · 2026-06
HVLP spray gun~ ~1.329 krIndicative · HC Farver (Starchem H921) · 2026-06
Powder gun for powder coatingPowder coating of metal parts: application of powder coating that is then cured in an oven to a wear- and rust-resistant finish.
Airless spray system~ ~11.995 kr (Graco UltraMax HH)Indicative · HC Farver · 2026-07
Compressed air oil filter and condensate separatorEnsures clean, dry compressed air for spray painting and blasting so oil/water from the compressor does not cause craters or adhesion faults in the coating.
Measuring tool
Coating thickness gaugeQuality control: documentation that the paint, powder or metallised layer meets the specified dry film thickness after treatment.
Profilometer (surface roughness)Documentation that the blasted anchor profile matches the profile depth required by the paint system, in line with ISO 8503.
Dew point/climate meterDocumentation that the painting weather conditions (in line with ISO 8502-4) are in order before spray painting begins.
Adhesion tester (cross-cut/pull-off)Quality control of the finished coating — documentation that the paint adheres sufficiently to the substrate.
Materials
Sandpaper and sanding discsStep-by-step pre-treatment and intermediate sanding: achieving the correct roughness on the workpiece and sanding between coats for good adhesion.
Cutting and grinding discs for angle grinder~ ~12–20 kr/stkIndicative · Bauhaus (Craftomat skæreskiver rustfri stål 125mm) · 2026-06
Degreasing and cleaning agentChemical pretreatment and cleaning: degreasing the part immediately before painting so the paint adheres correctly and without craters.
Metal primer~ ~120 kr (0,25 L)Indicative · Bauhaus (Hammerite Special Metal) · 2026-06
Masking/painter's tape~ 45–80 krIndicative · Bauhaus (Swingcolor Prof / Tesa) · 2026-06
Garnet sand (blasting abrasive)Sandblasting steel to cleanliness grade Sa 2-Sa 3 (ISO 8501-1) before priming — can be reused several times in a recirculating system.
Steel grit (blasting media)Blast cleaning in automated booths/plants (e.g. before powder coating or hot-dip galvanising), where the abrasive is collected and reused continuously.
Cold galvanising (zinc spray)Spot repair of damaged zinc coating (e.g. after welding or transport damage) without the part having to be re-galvanised.
Safety equipment
Respiratory protection A2P3Personal protection during spray painting and sanding against solvent vapours and paint/sanding dust.
Safety glasses and hearing protectionProtection of the eyes against grinding dust, sparks and spray mist, and of hearing when working with angle grinders and blasting equipment.
Disposable painter's overalls and nitrile glovesProtection of body and hands against lacquer, solvents and powder during pre-treatment and painting.