Tools & product range.
The tools, equipment and materials the trade uses. Prices are indicative market prices with source — always check the current price with the retailer.
Measuring tool
Digital calliper (150 mm)~ 1.175–1.875 krIndicative · WATTOO.DK / NJVS (Mitutoyo 500-181-30) · 2026-06
Micrometer screw gauge, external (0–25 mm)~ ~700–890 krIndicative · forhandlerpriser, Mitutoyo 103-137 · 2026-06
Dial gauge / dial test indicator~ fra ~1.560 kr (ekskl. moms)Indicative · RS Online (Mitutoyo 513-908-10E) · 2026-06
Steel try squareUsed to check squareness of workpieces and setups and for marking out before machining.
Surface roughness tester (Ra profilometer)Used to check whether a machined surface meets the Ra requirement stated on the drawing — especially after finer turning or grinding operations.
Refractometer for coolant/lubricant~ ~480–870 krIndicative · wattoo.dk / rtf.dk · 2026-07
Cutting tool
Carbide end mill (HM)Used to mill slots, flat faces, pockets and contours in steel, aluminium and stainless steel on manual and CNC milling machines.
Indexable insert (cutting insert) in cemented carbide~ ~30 kr/stk (ved køb af 10 stk.)Indicative · globaltools.dk / tilltools.de (CCMT vendeskær i hårdmetal) · 2026-06
Machine tap / tap set (metric)~ ~120–300 kr (sæt)Indicative · P. Lindberg / rustfribolte.dk · 2026-06
Centre drillUsed to make a precise starting point so a subsequent twist drill does not 'wander' on the workpiece surface, and for clamping between tailstock centre and chuck for long workpieces.
Twist drill set HSS-G (DIN 338)~ ~110 kr (5 stk., 2–6 mm)Indicative · BAUHAUS (Craftomat HSS metal-spiralborsæt) · 2026-07
Hand tools
Needle file set (6 pieces)~ ~210 krIndicative · BAUHAUS (Wisent nålefilesæt 140 mm) · 2026-06
Workshop file (coarse/fine file)Used for deburring, fitting and finishing workpieces after machining.
Tap wrenchUsed together with a set of machine taps to cut internal threads by hand, with a good feel for resistance and the risk of breaking the tap.
Torque wrench (1/2")~ ~599 krIndicative · thansen.dk (BYRONs Momentnøgle 1/2" Prof. 40-210Nm) · 2026-07
Materials
Aluminium/steel round bar (workpiece material)Used as a blank that is clamped in a lathe or milling machine and machined into the finished component.
Safety equipment
Safety glasses (clear)~ ~150 krIndicative · BAUHAUS (Zekler 25 klar) · 2026-06
Safety shoes (S3 / with toecap)Used in the metal workshop as protection against falling items and sharp swarf at the machines.
Chip hook / chip tongsUsed to clear chips away from the cutting area and the setup safely while the machine is running or just after a cut, when the chips are still hot and sharp.
Clamping
Three-jaw chuck (self-centring chuck)Used to clamp round or hexagonal workpieces in the lathe so they turn without runout while being machined.